FlexSpray®
Serving the Southeastern United States
1.5 to 40 Gallon
Tanks
General Information
on Spray Lubrication Systems
NOTE - Lower section
of menu has Technical Information
page links
Fluid Delivery Main Page
Accessories
Modular Components - High
Viscosity Pump, Standard Pump Cut-Away & Solenoid (buy
with or without remote tank)
Systems - One to 12 Pump
(Micro-Flex, Min-Flex, ...)
Systems - One to Two Pump Mod Flex - NEW 2003
Technical Information:
Maintenance, Pump Information, ...
Pump Part Identification Drawing &
List
Pump Picture - View Details via Cut-away of Standard & Micro Pump
Tip Selection - See the spray pattern for the
various tips
Trouble Shooting
THE “FLEXSPRAY” PISTON-PUMP
BODY GUARANTEE:
The pistons and pump bodies on all “FlexSpray”
pumps are guaranteed against failure due to cylinder bore scoring or material
defects or workmanship, during normal use, for as long as the pump assembly
continues to be in active service under the same application and design
criterion initially intended. Upon submission of a defective piston, pump body
or both, “FlexSpray” or one of its distributors will provide a replacement
piston and/or pump body of the same size and specification, with out cost to the
end user.
THE “FLEXSPRAY” PISTON-PUMP
BODY GUARANTEE:
The pistons and pump bodies on all “FlexSpray”
pumps are guaranteed against failure due to cylinder bore scoring or material
defects or workmanship, during normal use, for as long as the pump assembly
continues to be in active service under the same application and design
criterion initially intended. Upon submission of a defective piston, pump body
or both, “FlexSpray” or one of its distributors will provide a replacement
piston and/or pump body of the same size and specification, with out cost to the
end user.
Why Use Die
Lubricators?
To increase production, for the reduction of fluid use, to improve die
life and to improve press cleanliness and area safety.
FlexSpray®
- Configurations:
Slim-Flex - Small profile that ensures system availability by directly
mounting to press
Dual - Tandem unit for two presses running with independent signals
Modular - Provides individual pump control for multiple presses with
independent signals
Mod-Flex - Least expensive turnkey solution
Micro-Flex - Compact system for portability between presses
Min-Flex - Compact system for portability between presses
Mid-Flex - Mid range system for single and multi-point application
Max-Flex - High range system for single and multi-point application where
greater amounts of lubricant are required
FlexSpray®
- Capacity:
Variable depending on customer's needs - 1.25, 1.5, 2.5, 5, 10 and 40 gallon
stainless steel tanks
One to twelve pumps actuated off one press signal
Choose from two pump volumes and two fluid viscosity ranges (standard,
micro and high viscosity)
Standard
Pump Volume - 0.017 to
0.051 fluid ounces per pump cycle
Micro
Pump Volume - 0.005 to
0.017 fluid ounces per pump cycle
High Viscosity
Pump Volume - 0.025 to
0.051 fluid ounces per pump cycle
Standard
Pump Viscosity range
up to 500 SUS* at 100° F
Micro
Pump Viscosity range
up to 450 SUS* at 100° F
High Viscosity
Pump Viscosity range
up to 1,200* SUS at 100° F
* Please consult with
Variegate, Inc. for any viscosity ranges
above 400 SUS due to possible spray pattern degradation
NOTE - Custom engineering is
available
Options:
Spray Assemblies (Goose neck, Six Inch Stainless Shaft, etc.)
Spray Cabinets - Keeps presses cleaner and allows recycling of lubricants
Low Lubricant Level Flow Control & Indicator Light
Programmble Repeat Cycle Timer - used when multiple
spray applications required in one cycle to maximize lubricant
Programmble Counter - used on high speed presses to
allow one spray over several cycles to minimize lubricant
High Viscosity Pumps
Remote Operator Station
Rigid Magnetic Base Spray Assemblies
Drum Mount Kit
One to twelve pumps actuated off one press signal
NOTE - Other options are available
Typical Application:
To increase production, for the reduction of fluid use, to improve die life and to
improve press cleanliness and area safety.
FlexSpray
Systems - Standard Features:
Three Position Selector Switch · Power On Indicator Lights · Ross Solenoid
Valve with Lifetime Warranty · Filter, Regulator, Lubricator Assembly · Tank with
Fluid Filtration · Pump(s) · Spray Nozzle(s), Tubing & Associated Connectors
FlexSpray - Capacity:
- Variable depending on customer's needs - 1.5, 2.5, 5, 10 and 40 gallon stainless steel
tanks
- Three pump sizes
- One to twelve pumps actuated of one press signal
NOTE - Custom engineering is available
FlexSpray - Configurations:
Micro-Flex (2.5 gallon, 1-6 pumps) - Compact system for portability between
presses
Min-Flex (5 gallon, 1-6 pumps) - Small profile that ensures system
availability by directly mounting to press
Mid-Flex (10 gallon, 1-12 pumps) - Mid range system for single and
multi-point application
Max-Flex (40 gallon 1-12 pumps) - High range system for single and
multi-point application where greater amounts of lubricant are required
Options:
- Spray Cabinets - Keeps presses cleaner and allows recycling of lubricants
- Low Lubricant Level Flow Control & Indicator Light
- Programmble Repeat Cycle Timer
- Programmble Counter
- High Viscosity Pumps
- Remote Operator Station
- Rigid Magnetic Base Spray Assemblies
- Drum Mount Kit
NOTE - Other options are available
Modular FlexSpray:
Modular FlexSpray - Capacity:
- Variable depending on customer's needs - 1.5, 2.5, 5, 10 and 40 gallon stainless steel
tanks
- Three pump sizes
- Two standard or micro pumps per modular assembly or one high viscosity pump per modular
assembly
- One to twelve pumps with individual pump actuation control on every two standard or
micro pumps and every high viscosity pump
Options:
- Same as standard FlexSpray systems
Click here for a Quote
E-Mail:
Info@chpsystemsinc.com
Voice (423)318-8334
Facsimile: (423)581-7469
CHP Systems, Inc.
- 3007 Arrow Dr. Morristown, TN 37814
To Main Menu