Standard Features - FlexSpray® Micro, Mid, Min, and Max-Flex Systems:

  • Stainless Steel Tank and Control Enclosure
  • Pump (one to 12) on Manifold
  • Fluid Filtration (each pump has filter)
  • Three Position Selector Switch in Stainless Steel Cabinet
  • Power On Indicator Light
  • Ross Solenoid Valve
  • Filter, Regulator, Lubricator Assembly
  • Additional - Spray Nozzle Assembly (nozzle, check valve, tubing, quick connect, etc.) - Must purchase a configuration separately to match your individual requirements

    Capacity:

  • Variable depending on customer's needs - 1.5, 2.5, 5, 10 and 40 gallon stainless steel tanks
  • Choose from two pump volumes and two fluid viscosity ranges (standard, micro and high viscosity)
  • One to twelve pumps actuated of one press signal

    NOTE - Custom tanks are available

    Configurations:

  • Micro-Flex (2.5 gallon, 1-6 pumps) - Compact system for portability between presses
  • Min-Flex (5 gallon, 1-6 pumps) - Small profile that ensures system availability by directly mounting to press
  • Mid-Flex (10 gallon, 1-12 pumps) - Mid range system for single and multi-point application
  • Max-Flex (40 gallon 1-12 pumps) - High range system for single and multi-point application where greater amounts of lubricant are required

    Options:

  • Same as all systems

    • NOTE - Lower section of menu has Technical Information page links

    Fluid Delivery Main Page

    Accessories

    Modular Components - High Viscosity Pump, Standard Pump Cut-Away & Solenoid (buy with or without remote tank)

    Systems - One to 12 Pump (Micro-Flex, Min-Flex, ...)

    Systems - One to Two Pump Mod Flex - NEW 2003

    Technical Information:

    Maintenance, Pump Information, ...

    Pump Part Identification Drawing & List

    Pump Picture - View Details via Cut-away of Standard & Micro Pump

    Tip Selection - See the spray pattern for the various tips

    Trouble Shooting

    THE “FLEXSPRAY” PISTON-PUMP BODY GUARANTEE:

    The pistons and pump bodies on all “FlexSpray” pumps are guaranteed against failure due to cylinder bore scoring or material defects or workmanship, during normal use, for as long as the pump assembly continues to be in active service under the same application and design criterion initially intended. Upon submission of a defective piston, pump body or both, “FlexSpray” or one of its distributors will provide a replacement piston and/or pump body of the same size and specification, with out cost to the end user.

    Click here for a Quote

    E-Mail: Info@chpsystemsinc.com

    Voice (423)318-8334    Facsimile: (423)581-7469

    CHP Systems, Inc. - 3007 Arrow Dr.  Morristown, TN 37814

    To Main Menu